Products
Home > Products > Gasket Making Punches

Products

"Control the standard by the details, show the toughness by quality". Our firm has strived to establish a highly efficient and stable workers workforce and explored an effective high-quality management system for Gasket Making Punches,Gasket Punch Set,Gasket Punching Table tool Sets,Set Punch Tool,Punching Tool Set, We warmly welcome all intrigued customers to speak to us for additional information and facts.
Gasket Making Punches, By continuous innovation, we will supply you with more valuable merchandise and services, and also make a contribution for the development of the automobile industry at home and abroad. Both domestic and foreign merchants are strongly welcomed to join us to grow together.

Related Products

Hot Products

  • Guillotine Packing Cutter

    Guillotine Packing Cutter

    Guillotine Packing Cutter permits accurate cutting of rings from spiral or flat coil packings. The scale reads directly in terms of shaft sizes. In inches and in millimeters.
  • Packing Tool Set

    Packing Tool Set

    Packing Tool Set is for removing the packings or packing rings from different shape space.
  • Gasket Shear Mitre Shear Multi Angle Trim Cutter

    Gasket Shear Mitre Shear Multi Angle Trim Cutter

    Gasket Shear Mitre Shear Multi Angle Trim Cutter:Hard wearing, trade standard gasket shear. Ideal for cutting gasket, small plastics trims and various arts and craft materials, giving a quick straight cut every time. Product features and benefits when combined with Xpert Shears: Cuts at angles up to 45 degrees Clear markings on anvil for guidance when cutting angles
  • Double Head Sheet Nibbler Cutter

    Double Head Sheet Nibbler Cutter

    Double Head Sheet Nibbler Cutter: This dual head air metal nibbler cutter is to be used with an electric drill or air drill. Capable of cutting any kind of thin metal.
  • Gasket Punch Set

    Gasket Punch Set

    Gasket Punch Set 6mm - 38mm*16's punching dies and table. Used for punching holes in soft brass copper and other soft metals as well as leather canvas and gasketing materials. The set is composed of 16 punching dies ranging in size from 6 to 38mm diameter.
  • 9 Piece Punch and Die Set

    9 Piece Punch and Die Set

    9 Piece Punch and Die Set is an export product, (9pc punch & Die set) used in home and factory use to produce simple gasket,
  • Related Blog
  • Reviews

  • Gasket Seating

    There are two major factors to be considered with regard to gasket seating. The first is the gasket material itself. The ASME Unfired Pressure Vessel Code Section VIII, Division 1 defines minimum design seating stresses for variety of gasket materials.

  • Effecting a Seal

    A seal is affected by compressing the gasket material and causing it to flow into the imperfections on the gasket seating surfaces so that intimate contact is made between the gasket and the gasket seating surfaces preventing the escape of the confined fluid. Basically there are four different methods that may be used either singly or in combination to achieve this unbroken barrier.

  • How to Cut Gasket material?

    Clean radius and straight cuts are achievable on gasket material with the proper tooling. Thinner types of gasket material require nothing more than sharp blades and hollow gasket cutters. Gasket material over 1/4-inch thick require specialized mechanical tools to create the precision cuts necessary to seal a piece of equipment and is best left to professionals. Properly securing the gasket material and ensuring the tools used are in good condition will allow you to cut thinner gasket material efficiently and precisely.

  • Installing Grafoil Crinkle Gasket Tape

    1. Brush off any rust or foreign particles. Wipe flange surface thoroughly with a rag soaked in acetone or other suitable solvent to remove grease or oil. 2. Insert fingernail between the paper backing strip and the tape and strip the paper back three to six inches. Draw a reference line in flange and press squared off end of tape against it. 3. Now, start laying the tape along the face of the flange, peeling the paper backing as you go. To prevent the adhesive surfaces of the tape from doubling back on themselves and sticking together, strip away only a few inches of paper at a time.

  • Braiding Machine Ship to Poland

    More than 10 sets of braiding machines will be shipped to Poland within this week.

  • Spiral wound gasket production process and equipment

    In the present seal, metal spiral wound gasket with excellent elasticity, high temperature, high pressure,low temperature and other characteristics, has become a very wide range of applied seal. Especially suitable for uneven loading, relaxation and easy access together, cyclical changes in temperature and pressure of the occasion, is the main flange gasket. In the petrochemical pipelines, mechanicalseals,shipbuilding,metallurgy, aerospace and other industries widely.

Send Inquiry